static casting
英 [ˈstætɪk ˈkɑːstɪŋ]
美 [ˈstætɪk ˈkæstɪŋ]
网络 静态铸造; 静态浇铸; 静模铸造; 静态浇注
双语例句
- With features of compact organization, homogeneous struc-ture, higher yield and less machining of castings, such sleeve used as end roll of Al-foil rolling mill has ob-tained better effect with lower production cost by more than 20% less than general static casting.
离心铸造铸钢套筒具有组织致密、均匀、工艺出品率高和铸件加工量少等特点，生产成本比普通静态铸造降低20%以上，用作铝箔轧机的出口端卷筒，获得了较好的效果。 - MC nylon reinforced by glass fiber and flyash was prepared based on the principle of static casting of MC nylon.
利用铸型尼龙（MC尼龙）静态浇铸的原理，通过阴离子聚合制得了玻纤、粉煤灰增强MC尼龙。 - In light of the static and dynamic pile testing on a single casting pile of a project, the limit bearing capacity of a single pile that can not meet the design requirement is analyzed;
针对某工程钻孔灌注桩的单桩进行静、动试验，对单桩极限承载力不能满足设计要求进行了分析。 - The results showed that pressure acting on melt consists of static pressure and extra pressure during the centrifugal casting process. Static pressure is determined by melt height while extra pressure is determined substantially by density of molten metal and rotating angular velocity.
试验结果表明，离心浇注过程中，作用在熔体上的压力由静态压力和附加压力两部分组成，静态压力由金属液高度决定，附加压力主要由金属液密度以及旋转角速度来决定。 - The flow field in a new mold with hybrid magnetic fields with combination of alternative and static electromagnetic fields for continuous casting was simulated.
采用数值模拟方法分析了电磁连铸复合式结晶器内的流场。 - The casting methods include investment static casting and centrifugal casting.
铸造方法包括熔模静铸及熔模离心铸造。 - Advanced cast methods used domestically and abroad in famous automobile manufacturers and foundries for cylinder castings of which technical performance has been presented include air impact molding, static pressure molding, vertical parting flaskless molding machine and full mold casting, etc.
介绍了汽缸体铸件的技术性能、国内外各大汽车公司和汽车铸造厂所采用的先进铸造方法，这些方法有气冲造型、静压造型、垂直分型无箱射压造型、实型铸造等。 - On the basis of Nickel mould plate fabricated by melting photoresist and electroforming PMMA cylindrical microlens arrays are fabricated by the replication technology of static casting plastic.
在光刻热熔成型以及电铸复制得到的柱面微透镜阵列镍模板基础上，采用铸塑工艺得到了高质量的PMMA柱面微透镜阵列。 - Through studies and analyses on retapping cast-in-place piles with driven casting and static loading tests of treatment form of different pile tips, the way is discussed for further improving the bearing capacity of cast-in-place pile with driven casting.
通过对不同桩尖处理形式的复打沉管灌注桩和静载试验的研究分析，从处理桩尖方面入手，探讨了沉管灌注桩进一步提高承载力的途径。 - The static bending property and foe effect of banded structure have been studied with small specimens made of continuous casting medium plate of the type JW steel.
用小试样研究了连铸JW钢中板的静弯特性及带状组织的影响。